Crystal Quest Undersink Fluoride Multi PLUS Water Filter System

Water travels through 6 stages of filtration

In stage 1, water travel through a FLUORIDE REMOVAL cartridge. Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 2700 ppm Fluoride (Avg. 600 to 900 Gallons) .* As high as 6600 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed.*

In stage 2, and 6 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

In stages 3 and 4, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (KDF-55D ®, and KDF-85D ®.) KDF is a major advancement in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (REDOX) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

In stages 5, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzine) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

Recommended flow rate: below 0.5 GPM.

Easy to use and install on all standard sinks.

Dimensions: 5" x 16"

Weight: 10 lbs